|Containerized Database with Persistent Storage|Applications|[Exercise](containerized_db_persistent_storage.md)|[Solution](solutions/containerized_db_persistent_storage.md)
This can be tricky to answer since there are many ways to create a containers:
- Docker
- systemd-nspawn
- LXC
If to focus on OCI (Open Container Initiative) based containers, it offers the following [definition](https://github.com/opencontainers/runtime-spec/blob/master/glossary.md#container): "An environment for executing processes with configurable isolation and resource limitations. For example, namespaces, resource limits, and mounts are all part of the container environment."
</b></details>
<details>
<summary>Why containers are needed? What is their goal?</summary><br><b>
OCI provides a good [explanation](https://github.com/opencontainers/runtime-spec/blob/master/principles.md#the-5-principles-of-standard-containers): "Define a unit of software delivery called a Standard Container. The goal of a Standard Container is to encapsulate a software component and all its dependencies in a format that is self-describing and portable, so that any compliant runtime can run it without extra dependencies, regardless of the underlying machine and the contents of the container."
<summary>How are containers different from virtual machines (VMs)?</summary><br><b>
The primary difference between containers and VMs is that containers allow you to virtualize
multiple workloads on a single operating system while in the case of VMs, the hardware is being virtualized to run multiple machines each with its own guest OS.
You can also think about it as containers are for OS-level virtualization while VMs are for hardware virtualization.
* Containers don't require an entire guest operating system as VMs. Containers share the system's kernel as opposed to VMs. They isolate themselves via the use of kernel's features such as namespaces and cgroups
* It usually takes a few seconds to set up a container as opposed to VMs which can take minutes or at least more time than containers as there is an entire OS to boot and initialize as opposed to containers which has share of the underlying OS
* Virtual machines considered to be more secured than containers
* VMs portability considered to be limited when compared to containers
</b></details>
<details>
<summary>In which scenarios would you use containers and in which you would prefer to use VMs?</summary><br><b>
You should choose VMs when:
* You need run an application which requires all the resources and functionalities of an OS
* You need full isolation and security
You should choose containers when:
* You need a lightweight solution
* Running multiple versions or instances of a single application
</b></details>
<details>
<summary>Describe the process of containerizing an application</summary><br><b>
<summary>What are some of the advantages in using containers? you can compare to other options like VMs</summary><br><b>
* Reusable: container can be used by multiple different users for different usages - production vs. staging, development, testing, etc.
* Lightweight: containers are fairly lightweight which means deployments can be done quickly since you don't need to install a full OS (as in VMs for example)
* Isolation: Containers are isolated environments, usually changes made to the OS won't affect the containers and vice-versa
Because the container immediately exits after running the ubuntu image. This is completely normal and expected as containers designed to run a service or a app and exit when they are done running it. To see the container you can run `podman ps -a`
If you want the container to keep running, you can run a command like `sleep 100` which will run for 100 seconds or you can attach to terminal of the container with a command similar: `podman container run -it ubuntu /bin/bash`
<summary>What happens when you run <code>docker container run ubuntu</code>?</summary><br><b>
1. Docker client posts the command to the API server running as part of the Docker daemon
2. Docker daemon checks if a local image exists
1. If it exists, it will use it
2. If doesn't exists, it will go to the remote registry (Docker Hub by default) and pull the image locally
3. containerd and runc are instructed (by the daemon) to create and start the container
</b></details>
<details>
<summary>How to run a container in the background?</summary><br><b>
With the -d flag. It will run in the background and will not attach it to the terminal.
`docker container run -d httpd` or `podman container run -d httpd`
</b></details>
<details>
<summary>If you'll run <code>sleep 100</code> inside a container, will you see it when listing all the processes of the host on which the container runs? Why?</summary><br><b>
</b></details>
<details>
<summary>True or False? If image <code>httpd-service</code> has an entry point for running the httpd service then, the following will run the container and eventually the httpd service <code>podman run httpd-service ls</code></summary><br><b>
False. Running that command will override the entry point so the httpd service won't run and instead podman will run the `ls` command.
</b></details>
<details>
<summary>True or False? Running <code>podman restart CONTAINER_NAME</code> kills the main process inside the container and runs it again from scratch</summary><br><b>
False. `podman restart` creates an entirely new container with the same ID while reusing the filesystem and state of the original container.
</b></details>
<details>
<summary>You would like to run a web server inside a container but, be able to access it from the localhost. Demonstrate how to do that</summary><br><b>
```
podman run -d --name apache1 -p 8080:8080 registry.redhat.io/rhel8/httpd-24
curl 127.0.0.1:8080
```
</b></details>
<details>
<summary>After running a container, it stopped. <code>podman ps</code> shows nothing. How can you show its details?</summary><br><b>
`podman ps -a` will shows also the details of a stopped container.
</b></details>
<details>
<summary>How to list all the image tags for a given container image?</summary><br><b>
<summary>You are interested in running a container with snake game application. How can you search for such image and check if it exists?</summary><br><b>
`podman search snake-game`. Surprisingly, there are a couple of matches :)
```
INDEX NAME DESCRIPTION STARS
docker.io docker.io/dyego/snake-game 0
docker.io docker.io/ainizetap/snake-game 0
docker.io docker.io/islamifauzi/snake-games 0
docker.io docker.io/harish1551/snake-game 0
docker.io docker.io/spkane/snake-game A console based snake game in a container 0
docker.io docker.io/rahulgadre/snake-game This repository contains all the files to ru... 0
- The layers of an image is where all the content is stored - code, files, etc.
- Each layer is independent
- Each layer has an ID that is an hash based on its content
- The layers (as the image) are immutable which means a change to one of the layers can be easily identified
</b></details>
<details>
<summary>True or False? Changing the content of any of the image layers will cause the hash content of the image to change</summary><br><b>
True. These hashes are content based and since images (and their layers) are immutable, any change will cause the hashes to change.
</b></details>
<details>
<summary>How to list the layers of an image?</summary><br><b>
In case of Docker, you can use `docker image inspect <name>`
</b></details>
<details>
<summary>True or False? In most cases, container images contain their own kernel</summary><br><b>
False. They share and access the one used by the host on which they are running.
</b></details>
<details>
<summary>True or False? A single container image can have multiple tags</summary><br><b>
True. When listing images, you might be able to see two images with the same ID but different tags.
</b></details>
<details>
<summary>What is a dangling image?</summary><br><b>
It's an image without tags attached to it.
One way to reach this situation is by building an image with exact same name and tag as another already existing image. It can be still referenced by using its full SHA.
</b></details>
<details>
<summary>How to see changes done to a given image over time?</summary><br><b>
In the case of Docker, you could use `docker history <name>`
<summary>What `podman commit` does?. When will you use it?</summary><br><b>
Creates a new image from a running container. Users can apply extra changes to be saved in the new image version.
Most of the time the user case for using `podman commit` would be to apply changes allowing to better debug the container. Not so much for creating a new image since commit adds additional overhead of potential logs and processes, not required for running the application in the container. This eventually makes images created by `podman commit` bigger due to the additional data stored there.
<summary>True or False? Multiple images can share layers</summary><br><b>
True.<br>
One evidence for that can be found in pulling images. Sometimes when you pull an image, you'll see a line similar to the following:<br>
`fa20momervif17: already exists`
This is because it recognizes such layer already exists on the host, so there is no need to pull the same layer twice.
</b></details>
<details>
<summary>What is the digest of an image? What problem does it solves?</summary><br><b>
Tags are mutable. This is mean that we can have two different images with the same name and the same tag. It can be very confusing to see two images with the same name and the same tag in your environment. How would you know if they are truly the same or are they different?<br>
This is where "digests` come handy. A digest is a content-addressable identifier. It isn't mutable as tags. Its value is predictable and this is how you can tell if two images are the same content wise and not merely by looking at the name and the tag of the images.
</b></details>
<details>
<summary>True or False? A single image can support multiple architectures (Linux x64, Windows x64, ...)</summary><br><b>
True.
</b></details>
<details>
<summary>What is a distribution hash in regards to layers?</summary><br><b>
- Layers are compressed when pushed or pulled
- distribution hash is the hash of the compressed layer
- the distribution hash used when pulling or pushing images for verification (making sure no one tempered with image or layers)
- It's also used for avoiding ID collisions (a case where two images have exactly the same generated ID)
</b></details>
<details>
<summary>How multi-architecture images work? Explain by describing what happens when an image is pulled</summary><br><b>
1. A client makes a call to the registry to use a specific image (using an image name and optionally a tag)
2. A manifest list is parsed (assuming it exists) to check if the architecture of the client is supported and available as a manifest
3. If it is supported (a manifest for the architecture is available) the relevant manifest is parsed to obtain the IDs of the layers
4. Each layer is then pulled using the obtained IDs from the previous step
</b></details>
<details>
<summary>How to check which architectures a certain container image supports?</summary><br><b>
`docker manifest inspect <name>`
</b></details>
<details>
<summary>How to check what a certain container image will execute once we'll run a container based on that image?</summary><br><b>
Look for "Cmd" or "Entrypoint" fields in the output of `docker image inspec <image name>`
</b></details>
<details>
<summary>How to view the instructions that were used to build image?</summary><br><b>
When you build an image for the first time, the different layers are being cached. So, while the first build of the image might take time, any other build of the same image (given that Containerfile/Dockerfile didn't change or the content used by the instructions) will be instant thanks to the caching mechanism used.
1. The first instruction (FROM) will check if base image already exists on the host before pulling it
2. For the next instruction, it will check in the build cache if an existing layer was built from the same base image + if it used the same instruction
1. If it finds such layer, it skips the instruction and links the existing layer and it keeps using the cache.
2. If it doesn't find a matching layer, it builds the layer and the cache is invalidated.
Note: in some cases (like COPY and ADD instructions) the instruction might stay the same but if the content of what being copied is changed then the cache is invalidated. The way this check is done is by comparing the checksum of each file that is being copied.
<summary>How to remove an image from the host?</summary><br><b>
`podman rmi IMAGE`
It will fail if some containers are using it. You can then use `--force` flag for that but generally, it's better if you inspect the containers using the image before doing so.
<summary>What ways are there to reduce container images size?</summary><br><b>
* Reduce number of instructions - in some case you may be able to join layers by installing multiple packages with one instructions for example or using `&&` to concatenate RUN instructions
* Using smaller images - in some cases you might be using images that contain more than what is needed for your application to run. It is good to get overview of some images and see whether you can use smaller images that you are usually using.
* Cleanup after running commands - some commands, like packages installation, create some metadata or cache that you might not need for running the application. It's important to clean up after such commands to reduce the image size
* For Docker images, you can use multi-stage builds
</b></details>
<details>
<summary>What are the pros and cons of squashing images?</summary><br><b>
Pros:
* Smaller image
* Reducing number of layers (especially if the image has lot of layers)
Cons:
* No sharing of the image layers
* Push and pull can take more time (because no matching layers found on target)
Image tags are used to distinguish between multiple versions of the same software or project. Let's say you developed a project called "FluffyUnicorn" and the current release is `1.0`. You are about to release `1.1` but you still want to keep `1.0` as stable release for anyone who is interested in it. What would you do? If your answer is create another, separate new image, then you probably want to rethink the idea and just create a new image tag for the new release.
In addition, it's important to note that container registries support tags. So when pulling an image, you can specify a specific tag of that image.
Different container engines (e.g. Docker, Podman) can build images automatically by reading the instructions from a Containerfile/Dockerfile. A Containerfile/Dockerfile is a text file that contains all the instructions for building an image which containers can use.
In every Containerfile/Dockerfile, you can find the instruction `FROM <image name>` which is also the first instruction (at least most of the time. You can put ARG before).<br>
* Include only the packages you are going to use. Nothing else.
* Specify a tag in FROM instruction. Not using a tag means you'll always pull the latest, which changes over time and might result in unexpected result.
* Do not use environment variables to share secrets
* Use images from official repositories
* Keep images small! - you want them only to include what is required for the application to run successfully. Nothing else.
* If are using the apt package manager, you might want to use 'no-install-recommends' with `apt-get install` to install only main dependencies (instead of suggested, recommended packages)
<summary>What is the "build context"?</summary><br><b>
[Docker docs](https://docs.docker.com/engine/reference/commandline/build): "A build’s context is the set of files located in the specified PATH or URL"
COPY takes in a source and destination. It lets you copy in a file or directory from the build context into the Docker image itself.<br>
ADD lets you do the same, but it also supports two other sources. You can use a URL instead of a file or directory from the build context. In addition, you can extract a tar file from the source directly into the destination.
RUN lets you execute commands inside of your Docker image. These commands get executed once at build time and get written into your Docker image as a new layer.
You could say that CMD is a Docker run-time operation, meaning it’s not something that gets executed at build time. It happens when you run an image. A running image is called a container.
<summary>Is it possible to identify which instruction create a new layer from the output of <code>podman image history</code>?</summary><br><b>
</b></details>
<details>
<summary>True or False? Each Containerfile instruction runs in an independent container using an image built from every previous layer/entry</summary><br><b>
True
</b></details>
<details>
<summary>What's the difference between these two forms:
```
ENTRYPOINT ["cmd", "param0", "param1"]
CMD ["param0"]
ENTRYPOINT cmd param0 param1
CMD param0
```
</summary><br><b>
The first form is also referred as "Exec form" and the second one is referred as "Shell form".<br>
The second one (Shell form) wraps the commands in `/bin/sh -c` hence creates a shell process for it.
While using either Exec form or Shell form might be fine, it's the mixing that can lead to unexpected results.<br>
Consider:
```
ENTRYPOINT ["ls"]
CMD /tmp
```
That would results in running `ls /bin/sh -c /tmp`
</b></details>
<details>
<summary>Containerfile/Dockerfile can contain more than one ENTRYPOINT instruction and one CMD instruction</summary><br><b>
True but in case of ENTRYPOINT and CMD only the last instruction takes effect.
</b></details>
<details>
<summary>What happens when CMD instruction is defined but not an ENTRYPOINT instruction in a Containerfile/Dockerfile?</summary><br><b>
The ENTRYPOINT from the base image is being used in such case.
</b></details>
<details>
<summary>In the case of running <code>podman run -it IMAGE ls</code> the <code>ls</code> overrides the <code>___</code> instruction</summary><br><b>
CMD
</b></details>
<aname="questions-containers-storage"></a>
### Storage
<details>
<summary>Container storage is said to be ephemeral. What does it mean?</summary><br><b>
It means the contents of the container and the data generated by it, is gone when the container is removed.
</b></details>
<details>
<summary>True or False? Applications running on containers, should use the container storage to store persistent data</summary><br><b>
False. Containers are not built to store persistent data and even if it's possible with some implementations, it might not perform well in case of applications with intensive I/O operations.
</b></details>
<details>
<summary>You stopped a running container but, it still uses the storage in case you ever resume it. How to reclaim the storage of a container?</summary><br><b>
In order to reclaim the storage of a container, you have to remove it.
</b></details>
<details>
<summary>How to create a new volume?</summary><br><b>
```
CONTAINER_BINARY=podman
$CONTAINER_BINARY volume create some_volume
```
</b></details>
<details>
<summary>How to mount a directory from the host to a container?</summary><br><b>
```
CONTAINER_BINARY=podman
mkdir /tmp/dir_on_the_host
$CONTAINER_BINARY run -v /tmp/dir_on_the_host:/tmp/dir_on_the_container IMAGE_NAME
```
In some systems you'll have also to adjust security on the host itself:
<summary>What Linux kernel features does containers use?</summary><br><b>
* cgroups (Control Groups): used for limiting the amount of resources a certain groups of processes (and their children of course) use. This way, a group of processes isn't consuming all host resources and other groups can run and use part of the resources as well
* namespaces: same as cgroups, namespaces isolate some of the system resources so it's available only for processes in the namespace. Differently from cgroups the focus with namespaces is on resources like mount points, IPC, network, ... and not about memory and CPU as in cgroups
* SElinux: the access control mechanism used to protect processes. Unfortunately to this date many users don't actually understand SElinux and some turn it off but nonetheless, it's a very important security feature of the Linux kernel, used by container as well
* Seccomp: similarly to SElinux, it's also a security mechanism, but its focus is on limiting the processes in regards to using system calls and file descriptors
cgroup: Control Groups provide a mechanism for aggregating/partitioning sets of tasks, and all their future children, into hierarchical groups with specialized behavior.
namespace: wraps a global system resource in an abstraction that makes it appear to the processes within the namespace that they have their own isolated instance of the global resource.
In short:
Cgroups = limits how much you can use;
namespaces = limits what you can see (and therefore use)
Cgroups involve resource metering and limiting:
memory
CPU
block I/O
network
Namespaces provide processes with their own view of the system
<summary>True or False? Containers have ephemeral storage layer</summary><br><b>
True. The ephemeral storage layer is added on top of the base image layer and is exclusive to the running container. This way, containers created from the same base image, don't share the same storage.
<summary>Which components/layers compose the Docker technology?</summary><br><b>
1. Runtime - responsible for starting and stopping containers
2. Daemon - implements the Docker API and takes care of managing images (including builds), authentication, security, networking, etc.
3. Orchestrator
</b></details>
<details>
<summary>What components are part of the Docker engine?</summary><br><b>
- Docker daemon
- containerd
- runc
</b></details>
<details>
<summary>What is the low-level runtime?</summary><br><b>
- The low level runtime is called runc
- It manages every container running on Docker host
- Its purpose is to interact with the underlying OS to start and stop containers
- Its reference implementation is of the OCI (Open Containers Initiative) container-runtime-spec
- It's a small CLI wrapper for libcontainer
</b></details>
<details>
<summary>What is the high-level runtime?</summary><br><b>
- The high level runtime is called containerd
- It was developed by Docker Inc and at some point donated to CNCF
- It manages the whole lifecycle of a container - start, stop, remove and pause
- It take care of setting up network interfaces, volume, pushing and pulling images, ...
- It manages the lower level runtime (runc) instances
- It's used both by Docker and Kubernetes as a container runtime
- It sits between Docker daemon and runc at the OCI layer
Note: running `ps -ef | grep -i containerd` on a system with Docker installed and running, you should see a process of containerd
</b></details>
<details>
<summary>True or False? The docker daemon (dockerd) performs lower-level tasks compared to containerd</summary><br><b>
False. The Docker daemon performs higher-level tasks compared to containerd.<br>
It's responsible for managing networks, volumes, images, ...
</b></details>
<details>
<summary>Describe in detail what happens when you run `docker pull image:tag`?</summary><br><b>
Docker CLI passes your request to Docker daemon. Dockerd Logs shows the process
docker.io/library/busybox:latest resolved to a manifestList object with 9 entries; looking for a unknown/amd64 match
found match for linux/amd64 with media type application/vnd.docker.distribution.manifest.v2+json, digest sha256:400ee2ed939df769d4681023810d2e4fb9479b8401d97003c710d0e20f7c49c6
pulling blob \"sha256:61c5ed1cbdf8e801f3b73d906c61261ad916b2532d6756e7c4fbcacb975299fb Downloaded 61c5ed1cbdf8 to tempfile /var/lib/docker/tmp/GetImageBlob909736690
Applying tar in /var/lib/docker/overlay2/507df36fe373108f19df4b22a07d10de7800f33c9613acb139827ba2645444f7/diff" storage-driver=overlay2
Applied tar sha256:514c3a3e64d4ebf15f482c9e8909d130bcd53bcc452f0225b0a04744de7b8c43 to 507df36fe373108f19df4b22a07d10de7800f33c9613acb139827ba2645444f7, size: 1223534
</b></details>
<details>
<summary>Describe in detail what happens when you run a container</summary><br><b>
1. The Docker client converts the run command into an API payload
2. It then POST the payload to the API endpoint exposed by the Docker daemon
3. When the daemon receives the command to create a new container, it makes a call to containerd via gRPC
4. containerd converts the required image into an OCI bundle and tells runc to use that bundle for creating the container
5. runc interfaces with the OS kernel to pull together the different constructs (namespace, cgroups, etc.) used for creating the container
6. Container process is started as a child-process of runc
7. Once it starts, runc exists
</b></details>
<details>
<summary>True or False? Killing the Docker daemon will kill all the running containers</summary><br><b>
False. While this was true at some point, today the container runtime isn't part of the daemon (it's part of containerd and runc) so stopping or killing the daemon will not affect running containers.
</b></details>
<details>
<summary>True or False? containerd forks a new instance runc for every container it creates</summary><br><b>
True
</b></details>
<details>
<summary>True or False? Running a dozen of containers will result in having a dozen of runc processes</summary><br><b>
False. Once a container is created, the parent runc process exists.
</b></details>
<details>
<summary>What is shim in regards to Docker?</summary><br><b>
shim is the process that becomes the container's parent when runc process exists. It's responsible for:
- Reporting exit code back to the Docker daemon
- Making sure the container doesn't terminate if the daemon is being restarted. It does so by keeping the stdout and stdin open
</b></details>
<details>
<summary>How would you transfer data from one container into another?</summary><br><b>
</b></details>
<details>
<summary>What happens to data of the container when a container exists?</summary><br><b>
</b></details>
<details>
<summary>How do you remove old, non running, containers?</summary><br><b>
1. To remove one or more Docker images use the docker container rm command followed by the ID of the containers you want to remove.
2. The docker system prune command will remove all stopped containers, all dangling images, and all unused networks
3. docker rm $(docker ps -a -q) - This command will delete all stopped containers. The command docker ps -a -q will return all existing container IDs and pass them to the rm command which will delete them. Any running containers will not be deleted.
</b></details>
<details>
<summary>How the Docker client communicates with the daemon?</summary><br><b>
A Docker image is built up from a series of layers. Each layer represents an instruction in the image’s Containerfile/Dockerfile. Each layer except the very last one is read-only.
Each layer is only a set of differences from the layer before it. The layers are stacked on top of each other. When you create a new container, you add a new writable layer on top of the underlying layers. This layer is often called the “container layer”. All changes made to the running container, such as writing new files, modifying existing files, and deleting files, are written to this thin writable container layer.
The major difference between a container and an image is the top writable layer. All writes to the container that add new or modify existing data are stored in this writable layer. When the container is deleted, the writable layer is also deleted. The underlying image remains unchanged.
Because each container has its own writable container layer, and all changes are stored in this container layer, multiple containers can share access to the same underlying image and yet have their own data state.
</b></details>
<details>
<summary>What best practices are you familiar related to working with containers?</summary><br><b>
</b></details>
<details>
<summary>How do you manage persistent storage in Docker?</summary><br><b>
</b></details>
<details>
<summary>How can you connect from the inside of your container to the localhost of your host, where the container runs?</summary><br><b>
</b></details>
<details>
<summary>How do you copy files from Docker container to the host and vice versa?</summary><br><b>
<summary>Explain what is Docker compose and what is it used for</summary><br><b>
Compose is a tool for defining and running multi-container Docker applications. With Compose, you use a YAML file to configure your application’s services. Then, with a single command, you create and start all the services from your configuration.
For example, you can use it to set up ELK stack where the services are: elasticsearch, logstash and kibana. Each running in its own container.<br>
In general, it's useful for running applications which composed out of several different services. It let's you manage it as one deployed app, instead of different multiple separate services.
</b></details>
<details>
<summary>Describe the process of using Docker Compose</summary><br><br>
* Define the services you would like to run together in a docker-compose.yml file
As an example, imagine you have one Containerfile/Dockerfile where you first build the application and then run it. The whole build process of the application might be using packages and libraries you don't really need for running the application later. Moreover, the build process might produce different artifacts which not all are needed for running the application.
How do you deal with that? Sure, one option is to add more instructions to remove all the unnecessary stuff but, there are a couple of issues with this approach:
1. You need to know what to remove exactly and that might be not as straightforward as you think
2. You add new layers which are not really needed
A better solution might be to use multi-stage builds where one stage (the build process) is passing the relevant artifacts/outputs to the stage that runs the application.
</b></details>
<details>
<summary>True or False? In multi-stage builds, artifacts can be copied between stages</summary><br><b>
True. This allows us to eventually produce smaller images.
</b></details>
<details>
<summary>What <code>.dockerignore</code> is used for?</summary><br><b>
By default, Docker uses everything (all the files and directories) in the directory you use as build context.<br>
`.dockerignore` used for excluding files and directories from the build context
<summary>What security best practices are there regarding containers?</summary><br><b>
* Install only the necessary packages in the container
* Don't run containers as root when possible
* Don't mount the Docker daemon unix socket into any of the containers
* Set volumes and container's filesystem to read only
* DO NOT run containers with `--privilged` flag
</b></details>
<details>
<summary>A container can cause a kernel panic and bring down the whole host. What preventive actions can you apply to avoid this specific situation?</summary><br><b>
* Install only the necessary packages in the container
* Set volumes and container's filesystem to read only
<summary>What are some best practices you following in regards to using containers in production?</summary><br><b>
Images:
* Use images from official repositories
* Include only the packages you are going to use. Nothing else.
* Specify a tag in FROM instruction. Not using a tag means you'll always pull the latest, which changes over time and might result in unexpected result.
* Do not use environment variables to share secrets
* Keep images small! - you want them only to include what is required for the application to run successfully. Nothing else.
Components:
* Secured connection between components (e.g. client and server)
</b></details>
<details>
<summary>True or False? It's recommended for production environments that Docker client and server will communicate over network using HTTP socket</summary><br><b>
False. Communication between client and server shouldn't be done over HTTP since it's insecure. It's better to enforce the daemon to only accept network connection that are secured with TLS.<br>
Basically, the Docker daemon will only accept secured connections with certificates from trusted CA.
</b></details>
<details>
<summary>What forms of self-healing options available for Docker containers?</summary><br><b>
Restart Policies. It allows you to automatically restart containers after certain events.
</b></details>
<details>
<summary>What restart policies are you familiar with?</summary><br><b>
* always: restart the container when it's stopped (not with `docker container stop`)
* unless-stopped: restart the container unless it was in stopped status
* no: don't restart the container at any point (default policy)
* on-failure: restart the container when it exists due to an error (= exit code different than zero)
Historically, user needed root privileges to run containers. One of the most basic security recommendations is to provide users with minimum privileges for what they need.
For containers it's been the situation for a long time and still for running some containers today from docker.io, you'll need to have root privileges.
</b></details>
<details>
<summary>Are there disadvantages in running rootless containers?</summary><br><b>
Yes, the full list can be found [here](https://github.com/containers/podman/blob/main/rootless.md).
Some worth to mention:
- No binding to ports smaller than 1024
- No images sharing CRI-O or other rootful users
- No support running on NFS or parallel filesystem homerdirs
- Some commands don't work (mount, podman stats, checkpoint, restore, ...)
</b></details>
<details>
<summary>Give one example of rootless containers are more safe from security perspective</summary><br><b>
In rootless containers, user namespace appears to be running as root but it doesn't, it's executed with regular user privileges. If an attacker manages to get out of the user space to the host with the same privileges, there's not much he can do because it's not root privileges as opposed to containers that run with root privileges.
</b></details>
<details>
<summary>When running a container, usually a virtual ethernet device is created. To do so, root privileges are required. How is it then managed in rootless containers?</summary><br><b>
Networking is usually managed by Slirp in rootless containers. Slirp creates a tap device which is also the default route and it creates it in the network namespace of the container. This device's file descriptor passed to the parent who runs it in the default namespace and the default namespace connected to the internet. This enables communication externally and internally.
<summary>When running a container, usually a layered file system is created, but it requires root privileges. How is it then managed in rootless containers?</summary><br><b>
New drivers were created to allow creating filesystems in a user namespaces. Drivers like the FUSE-OverlayFS.
OCI (Open Container Initiative) is an open governance established in 2015 to standardize container creation - mostly image format and runtime. At that time there were a number of parties involved and the most prominent one was Docker.
<summary>Which operations OCI based containers must support?</summary><br><b>
Create, Kill, Delete, Start and Query State.
</b></details>
<aname="questions-containers-scenarios"></a>
### Scenarios
<details>
<summary>There is a running container that has a certain issue. You would like to share an image of that container with your team members, with certain environment variables set for debugging purposes. How would you do it?</summary><br><b>
`podman commit` can be a good choice for that. You can create a new image of the running container (with the issue) and share that new image with your team members.<br>
What you probably want to avoid using:
- Using something as `podman save/load` as it applies on an image, not a running container (so you'll share the image but the issue might not be reproduced when your team members run a container using it)
- Modifying Containerfile/Dockerfile as you don't really want to add environment variables meant for debugging to the source from which you usually build images
</b></details>
<details>
<summary>You and your team work on the same project, but different versions of it. For each version, the team creates a new, separate image. What would you suggest the team to change in such case?</summary><br><b>
Use tags. You can distinguish between different releases of a project using image tags. There is no need to create an entire separate image for version/release of a project.
