devops-exercises/exercises/kubernetes/README.md

Kubernetes

Kubernetes Exercises

Developer & "Regular" User Path

Name	Topic	Objective & Instructions	Solution	Comments
My First Pod	Pods	Exercise	Solution
"Killing" Containers	Pods	Exercise	Solution
Creating a Service	Service	Exercise	Solution
Creating a ReplicaSet	ReplicaSet	Exercise	Solution
Operating ReplicaSets	ReplicaSet	Exercise	Solution
ReplicaSets Selectors	ReplicaSet	Exercise	Solution

Kubernetes Self Assesment

What is Kubernetes? Why organizations are using it?

Kubernetes is an open-source system for automating deployment, scaling, and management of containerized applications.

To understand what Kubernetes is good for, let's look at some examples:

• You would like to run a certain application in a container on multiple different locations. Sure, if it's 2-3 servers/locations, you can do it by yourself but it can be challenging to scale it up to additional multiple location.
  
• Performing updates and changes across hundreds of containers
  
• Handle cases where the current load requires to scale up (or down)

When or why NOT to use Kubernetes?

• If you are big team of engineers (e.g. 200) deploying applications using containers and you need to manage scaling, rolling out updates, etc. You probably want to use Kubernetes

• If you manage low level infrastructure or baremetals, Kubernetes is probably not what you need or want

• If you are a small team (e.g. 20-50 engineers) Kubernetes might be an overkill (even if you need scale, rolling out updates, etc.)

What Kubernetes objects are there?

• Pod
• Service
• ReplicationController
• ReplicaSet
• DaemonSet
• Namespace
• ConfigMap ...

What fields are mandatory with any Kubernetes object?

metadata, kind and apiVersion

What actions or operations you consider as best practices when it comes to Kuberentes?

• Always make sure Kubernetes YAML files are valid. Applying automated checks and pipelines is recommended.
• Always specify requests and limits to prevent situation where containers are using the entire cluster memory which may lead to OOM issue

What is kubectl?

Kubectl is the Kubernetes command line tool that allows you to run commands against Kubernetes clusters. For example, you can use kubectl to deploy applications, inspect and manage cluster resources, and view logs.

What Kubernetes objects do you usually use when deploying applications in Kubernetes?

• Deployment - creates and the Pods and watches them
• Service: route traffic to Pods internally
• Ingress: route traffic from outside the cluster

Kubernetes - Cluster

What is a Kubernetes Cluster?

Red Hat Definition: "A Kubernetes cluster is a set of node machines for running containerized applications. If you’re running Kubernetes, you’re running a cluster. At a minimum, a cluster contains a worker node and a master node."

Read more here

What is a Node?

A node is a virtual or a physical machine that serves as a worker for running the applications.
It's recommended to have at least 3 nodes in a production environment.

What the master node is responsible for?

The master coordinates all the workflows in the cluster:

• Scheduling applications
• Managing desired state
• Rolling out new updates

Which command will list the nodes of the cluster?

kubectl get nodes

True or False? Every cluster must have 0 or more master nodes and at least 1 worker

False. A Kubernetes cluster consists of at least 1 master and can have 0 workers (although that wouldn't be very useful...)

What are the components of the master node?

• API Server - the Kubernetes API. All cluster components communicate through it
• Scheduler - assigns an application with a worker node it can run on
• Controller Manager - cluster maintenance (replications, node failures, etc.)
• etcd - stores cluster configuration

What are the components of a worker node?

• Kubelet - an agent responsible for node communication with the master.
• Kube-proxy - load balancing traffic between app components
• Container runtime - the engine runs the containers (Podman, Docker, ...)

Place the components on the right side of the image in the right place in the drawing

You are managing multiple Kubernetes clusters. How do you quickly change between the clusters using kubectl?

kubectl config use-context

How do you prevent high memory usage in your Kubernetes cluster and possibly issues like memory leak and OOM?

Apply requests and limits, especially on third party applications (where the uncertainty is even bigger)

Do you have experience with deploying a Kubernetes cluster? If so, can you describe the process in high-level?

1. Create multiple instances you will use as Kubernetes nodes/workers. Create also an instance to act as the Master. The instances can be provisioned in a cloud or they can be virtual machines on bare metal hosts.
2. Provision a certificate authority that will be used to generate TLS certificates for the different components of a Kubernetes cluster (kubelet, etcd, ...)
3. Generate a certificate and private key for the different components
4. Generate kubeconfigs so the different clients of Kubernetes can locate the API servers and authenticate.
5. Generate encryption key that will be used for encrypting the cluster data
6. Create an etcd cluster

Kubernetes - Pods

Explain what is a Pod

A Pod is a group of one or more containers, with shared storage and network resources, and a specification for how to run the containers.
Pods are the smallest deployable units of computing that you can create and manage in Kubernetes.

Deploy a pod called "my-pod" using the nginx:alpine image

kubectl run my-pod --image=nginx:alpine --restart=Never

If you are a Kubernetes beginner you should know that this is not a common way to run Pods. The common way is to run a Deployment which in turn runs Pod(s).
In addition, Pods and/or Deployments are usually defined in files rather than executed directly using only the CLI arguments.

What are your thoughts on "Pods are not meant to be created directly"?

Pods are usually indeed not created directly. You'll notice that Pods are usually created as part of another entities such as Deployments or ReplicaSets.
If a Pod dies, Kubernetes will not bring it back. This is why it's more useful for example to define ReplicaSets that will make sure that a given number of Pods will always run, even after a certain Pod dies.

How many containers can a pod contain?

A pod can include multiple containers but in most cases it would probably be one container per pod.

What use cases exist for running multiple containers in a single pod?

A web application with separate (= in their own containers) logging and monitoring components/adapters is one examples.
A CI/CD pipeline (using Tekton for example) can run multiple containers in one Pod if a Task contains multiple commands.

What are the possible Pod phases?

• Running - The Pod bound to a node and at least one container is running
• Failed - At least one container in the Pod terminated with a failure
• Succeeded - Every container in the Pod terminated with success
• Unknown - Pod's state could not be obtained
• Pending - Containers are not yet running (Perhaps images are still being downloaded or the pod wasn't scheduled yet)

True or False? By default, pods are isolated. This means they are unable to receive traffic from any source

False. By default, pods are non-isolated = pods accept traffic from any source.

True or False? The "Pending" phase means the Pod was not yet accepted by the Kubernetes cluster so the scheduler can't run it unless it's accepted

False. "Pending" is after the Pod was accepted by the cluster, but the container can't run for different reasons like images not yet downloaded.

How to list the pods in the current namespace?

kubectl get po

How view all the pods running in all the namespaces?

kubectl get pods --all-namespaces

True or False? A single Pod can be split across multiple nodes

False. A single Pod can run on a single node.

How to delete a pod?

kubectl delete pod pod_name

How to find out on which node a certain pod is running?

kubectl get po -o wide

What are "Static Pods"?

• Managed directly by Kubelet on specific node
• API server is not observing static Pods
• For each static Pod there is a mirror Pod on kubernetes API server but it can't be managed from there

Read more about it here

True or False? A volume defined in Pod can be accessed by all the containers of that Pod

True.

What happens when you run a Pod?

1. Kubectl sends a request to the API server to create the Pod
2. The Scheduler detects that there is an unassigned Pod (by monitoring the API server)
3. The Scheduler chooses a node to assign the Pod to
4. The Scheduler updates the API server about which node it chose
5. Kubelet (which also monitors the API server) notices there is a Pod assigned to the same node on which it runs and that Pod isn't running
6. Kubelet sends request to the container engine (e.g. Docker) to create and run the containers
7. An update is sent by Kubelet to the API server (notifying it that the Pod is running)

How to confirm a container is running after running the command kubectl run web --image nginxinc/nginx-unprivileged

• When you run kubectl describe pods <POD_NAME> it will tell whether the container is running: Status: Running
• Run a command inside the container: kubectl exec web -- ls

After running kubectl run database --image mongo you see the status is "CrashLoopBackOff". What could possibly went wrong and what do you do to confirm?

"CrashLoopBackOff" means the Pod is starting, crashing, starting...and so it repeats itself.
There are many different reasons to get this error - lack of permissions, init-container misconfiguration, persistent volume connection issue, etc.

One of the ways to check why it happened it to run kubectl describe po <POD_NAME> and having a look at the exit code

 Last State:     Terminated
   Reason:       Error
   Exit Code:    100

Another way to check what's going on, is to run kubectl logs <POD_NAME>. This will provide us with the logs from the containers running in that Pod.

Explain the purpose of the following lines

livenessProbe:
  exec:
    command:
    - cat
    - /appStatus
  initialDelaySeconds: 10
  periodSeconds: 5

These lines make use of liveness probe. It's used to restart a container when it reaches a non-desired state.
In this case, if the command cat /appStatus fails, Kubernetes will kill the container and will apply the restart policy. The initialDelaySeconds: 10 means that Kubelet will wait 10 seconds before running the command/probe for the first time. From that point on, it will run it every 5 seconds, as defined with periodSeconds

Explain the purpose of the following lines

readinessProbe:
      tcpSocket:
        port: 2017
      initialDelaySeconds: 15
      periodSeconds: 20

They define a readiness probe where the Pod will not be marked as "Ready" before it will be possible to connect to port 2017 of the container. The first check/probe will start after 15 seconds from the moment the container started to run and will continue to run the check/probe every 20 seconds until it will manage to connect to the defined port.

What does the "ErrImagePull" status of a Pod means?

It wasn't able to pull the image specified for running the container(s). This can happen if the client didn't authenticated for example.
More details can be obtained with kubectl describe po <POD_NAME>.

What happens when you delete a Pod?

1. The TERM signal is sent to kill the main processes inside the containers of the given Pod
2. Each container is given a period of 30 seconds to shut down the processes gracefully
3. If the grace period expires, the KILL signal is used to kill the processes forcefully and the containers as well

Explain liveness probes

Liveness probes is a useful mechanism used for restarting the container when a certain check/probe, the user has defined, fails.
For example, the user can define that the command cat /app/status will run every X seconds and the moment this command fails, the container will be restarted.

You can read more about it in kubernetes.io

Explain readiness probes

readiness probes used by Kubelet to know when a container is ready to start running, accepting traffic.
For example, a readiness probe can be to connect port 8080 on a container. Once Kubelet manages to connect it, the Pod is marked as ready

You can read more about it in kubernetes.io

How readiness probe status affect Services when they are combined?

Only containers whose state set to Success will be able to receive requests sent to the Service.

Why it's usually considered better to include one container per Pod?

One reason is that it makes it harder to scale, when you need to scale only one of the containers in a given Pod.

Kubernetes - Deployments

What is a "Deployment" in Kubernetes?

A Kubernetes Deployment is used to tell Kubernetes how to create or modify instances of the pods that hold a containerized application. Deployments can scale the number of replica pods, enable rollout of updated code in a controlled manner, or roll back to an earlier deployment version if necessary.

A Deployment is a declarative statement for the desired state for Pods and Replica Sets.

How to create a deployment?

cat << EOF | kubectl create -f -
apiVersion: v1
kind: Pod
metadata:
  name: nginx
spec:
  containers:
  - name: nginx
    image: nginx
EOF

How to edit a deployment?

kubectl edit deployment some-deployment

What happens after you edit a deployment and change the image?

The pod will terminate and another, new pod, will be created.

Also, when looking at the replicaset, you'll see the old replica doesn't have any pods and a new replicaset is created.

How to delete a deployment?

One way is by specifying the deployment name: kubectl delete deployment [deployment_name] Another way is using the deployment configuration file: kubectl delete -f deployment.yaml

What happens when you delete a deployment?

The pod related to the deployment will terminate and the replicaset will be removed.

How make an app accessible on private or external network?

Using a Service.

An internal load balancer in Kubernetes is called ____ and an external load balancer is called ____

An internal load balancer in Kubernetes is called Service and an external load balancer is Ingress

Kubernetes - Services

What is a Service in Kubernetes?

"An abstract way to expose an application running on a set of Pods as a network service." - read more here
In simpler words, it allows you to add an internal or external connectivity to a certain application running in a container.

True or False? The lifecycle of Pods and Services isn't connected so when a Pod dies, the Service still stays

True

What Service types are there?

• ClusterIP
• NodePort
• LoadBalancer
• ExternalName

More on this topic here

How Service and Deployment are connected?

The truth is they aren't connected. Service points to Pod(s) directly, without connecting to the Deployment in any way.

What are important steps in defining/adding a Service?

1. Making sure that targetPort of the Service is matching the containerPort of the POd
2. Making sure that selector matches at least one of the Pod's labels

What is the default service type in Kubernetes and what is it used for?

The default is ClusterIP and it's used for exposing a port internally. It's useful when you want to enable internal communication between Pods and prevent any external access.

How to get information on a certain service?

kubctl describe service <SERVICE_NAME>

It's more common to use kubectl describe svc ...

What the following command does?

kubectl expose rs some-replicaset --name=replicaset-svc --target-port=2017 --type=NodePort

It exposes a ReplicaSet by creating a service called 'replicaset-svc'. The exposed port is 2017 (this is the port used by the application) and the service type is NodePort which means it will be reachable externally.

True or False? the target port, in the case of running the following command, will be exposed only on one of the Kubernetes cluster nodes but it will routed to all the pods

kubectl expose rs some-replicaset --name=replicaset-svc --target-port=2017 --type=NodePort

False. It will be exposed on every node of the cluster and will be routed to one of the Pods (which belong to the ReplicaSet)

How to verify that a certain service configured to forward the requests to a given pod

Run kubectl describe service and see if the IPs from "Endpoints" match any IPs from the output of kubectl get pod -o wide

Explain what will happen when running apply on the following block

apiVersion: v1
kind: Service
metadata:
  name: some-app
spec:
  type: NodePort
  ports:
  - port: 8080
    nodePort: 2017
    protocol: TCP
  selector:
    type: backend
    service: some-app

It creates a new Service of the type "NodePort" which means it can be used for internal and external communication with the app.
The port of the application is 8080 and the requests will forwarded to this port. The exposed port is 2017. As a note, this is not a common practice, to specify the nodePort.
The port used TCP (instead of UDP) and this is also the default so you don't have to specify it.
The selector used by the Service to know to which Pods to forward the requests. In this case, Pods with the label "type: backend" and "service: some-app".

How to turn the following service into an external one?

spec:
  selector:
    app: some-app
  ports:
    - protocol: TCP
      port: 8081
      targetPort: 8081

Adding type: LoadBalancer and nodePort

spec:
  selector:
    app: some-app
  type: LoadBalancer
  ports:
    - protocol: TCP
      port: 8081
      targetPort: 8081
      nodePort: 32412

What would you use to route traffic from outside the Kubernetes cluster to services within a cluster?

Ingress

True or False? When "NodePort" is used, "ClusterIP" will be created automatically?

True

When would you use the "LoadBalancer" type

Mostly when you would like to combine it with cloud provider's load balancer

How would you map a service to an external address?

Using the 'ExternalName' directive.

Describe in detail what happens when you create a service

1. Kubectl sends a request to the API server to create a Service
2. The controller detects there is a new Service
3. Endpoint objects created with the same name as the service, by the controller
4. The controller is using the Service selector to identify the endpoints
5. kube-proxy detects there is a new endpoint object + new service and adds iptables rules to capture traffic to the Service port and redirect it to endpoints
6. kube-dns detects there is a new Service and adds the container record to the dns server

How to list the endpoints of a certain app?

kubectl get ep <name>

How can you find out information on a Service related to a certain Pod if all you can use is kubectl exec --

You can run kubectl exec <POD_NAME> -- env which will give you a couple environment variables related to the Service.
Variables such as [SERVICE_NAME]_SERVICE_HOST, [SERVICE_NAME]_SERVICE_PORT, ...

Describe what happens when a container tries to connect with its corresponding Service for the first time. Explain who added each of the components you include in your description

• The container looks at the nameserver defined in /etc/resolv.conf
• The container queries the nameserver so the address is resolved to the Service IP
• Requests sent to the Service IP are forwarded with iptables rules (or other chosen software) to the endpoint(s).

Explanation as to who added them:

• The nameserver in the container is added by kubelet during the scheduling of the Pod, by using kube-dns
• The DNS record of the service is added by kube-dns during the Service creation
• iptables rules are added by kube-proxy during Endpoint and Service creation

Kubernetes - Ingress

What is Ingress?

From Kubernetes docs: "Ingress exposes HTTP and HTTPS routes from outside the cluster to services within the cluster. Traffic routing is controlled by rules defined on the Ingress resource."

Read more here

Complete the following configuration file to make it Ingress

metadata:
  name: someapp-ingress
spec:

There are several ways to answer this question.

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  name: someapp-ingress
spec:
  rules:
  - host: my.host
    http:
      paths:
      - backend:
          serviceName: someapp-internal-service
          servicePort: 8080

Explain the meaning of "http", "host" and "backend" directives

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  name: someapp-ingress
spec:
  rules:
  - host: my.host
    http:
      paths:
      - backend:
          serviceName: someapp-internal-service
          servicePort: 8080

host is the entry point of the cluster so basically a valid domain address that maps to cluster's node IP address
the http line used for specifying that incoming requests will be forwarded to the internal service using http.
backend is referencing the internal service (serviceName is the name under metadata and servicePort is the port under the ports section).

Why using a wildcard in ingress host may lead to issues?

The reason you should not wildcard value in a host (like - host: *) is because you basically tell your Kubernetes cluster to forward all the traffic to the container where you used this ingress. This may cause the entire cluster to go down.

What is Ingress Controller?

An implementation for Ingress. It's basically another pod (or set of pods) that does evaluates and processes Ingress rules and this it manages all the redirections.

There are multiple Ingress Controller implementations (the one from Kubernetes is Kubernetes Nginx Ingress Controller).

What are some use cases for using Ingress?

• Multiple sub-domains (multiple host entries, each with its own service)
• One domain with multiple services (multiple paths where each one is mapped to a different service/application)

How to list Ingress in your namespace?

kubectl get ingress

What is Ingress Default Backend?

It specifies what do with an incoming request to the Kubernetes cluster that isn't mapped to any backend (= no rule to for mapping the request to a service). If the default backend service isn't defined, it's recommended to define so users still see some kind of message instead of nothing or unclear error.

How to configure a default backend?

Create Service resource that specifies the name of the default backend as reflected in kubectl desrcibe ingress ... and the port under the ports section.

How to configure TLS with Ingress?

Add tls and secretName entries.

spec:
  tls:
  - hosts:
    - some_app.com
    secretName: someapp-secret-tls

True or False? When configuring Ingress with TLS, the Secret component must be in the same namespace as the Ingress component

True

Which Kubernetes concept would you use to control traffic flow at the IP address or port level?

Network Policies

What the following block of lines does?

spec:
  replicas: 2
  selector:
    matchLabels:
      type: backend
  template:
    metadata:
      labels:
        type: backend
    spec:
      containers:
      - name: httpd-yup
        image: httpd

It defines a replicaset for Pods whose type is set to "backend" so at any given point of time there will be 2 concurrent Pods running.

Kubernetes - ReplicaSets

What is the purpose of ReplicaSet?

kubernetes.io: "A ReplicaSet's purpose is to maintain a stable set of replica Pods running at any given time. As such, it is often used to guarantee the availability of a specified number of identical Pods."

In simpler words, a ReplicaSet will ensure the specified number of Pods replicas is running for a selected Pod. If there are more Pods than defined in the ReplicaSet, some will be removed. If there are less than what is defined in the ReplicaSet then, then more replicas will be added.

What will happen when a Pod, created by ReplicaSet, is deleted directly with kubectl delete po ...?

The ReplicaSet will create a new Pod in order to reach the desired number of replicas.

True or False? If a ReplicaSet defines 2 replicas but there 3 Pods running matching the ReplicaSet selector, it will do nothing

False. It will terminate one of the Pods to reach the desired state of 2 replicas.

Describe the sequence of events in case of creating a ReplicaSet

• The client (e.g. kubectl) sends a request to the API server to create a ReplicaSet
• The Controller detects there is a new event requesting for a ReplicaSet
• The controller creates new Pod definitions (the exact number depends on what is defined in the ReplicaSet definition)
• The scheduler detects unassigned Pods and decides to which nodes to assign the Pods. This information sent to the API server
• Kubelet detects that two Pods were assigned to the node it's running on (as it constantly watching the API server)
• Kubelet sends requests to the container engine, to create the containers that are part of the Pod
• Kubelet sends a request to the API server to notify it the Pods were created

How to list ReplicaSets in the current namespace?

kubectl get rs

Is it possible to delete ReplicaSet without deleting the Pods it created?

Yes, with --cascase=false.

kubectl delete -f rs.yaml --cascade=false

What is the default number of replicas if not explicitly specified?

1

What the following output of kubectl get rs means?

NAME DESIRED CURRENT READY AGE web 2 2 0 2m23s

The replicaset web has 2 replicas. It seems that the containers inside the Pod(s) are not yet running since the value of READY is 0. It might be normal since it takes time for some containers to start running and it might be due to an error. Running kubectl describe po POD_NAME or kubectl logs POD_NAME can give us more information.

You run kubectl get rs and while DESIRED is set to 2, you see that READY is set to 0. What are some possible reasons for it to be 0?

• Images are still being pulled
• There is an error and the containers can't reach the state "Running"

True or False? Pods specified by the selector field of ReplicaSet must be created by the ReplicaSet itself

False. The Pods can be already running and initially they can be created by any object. It doesn't matter for the ReplicaSet and not a requirement for it to acquire and monitor them.

True or False? In case of a ReplicaSet, if Pods specified in the selector field don't exists, the ReplicaSet will wait for them to run before doing anything

False. It will take care of running the missing Pods.

In case of a ReplicaSet, Which field is mandatory in the spec section?

The field template in spec section is mandatory. It's used by the ReplicaSet to create new Pods when needed.

You've created a ReplicaSet, how to check whether the ReplicaSet found matching Pods or it created new Pods?

kubectl describe rs <ReplicaSet Name>

It will be visible under Events (the very last lines)

True or False? Deleting a ReplicaSet will delete the Pods it created

True (and not only the Pods but anything else it created).

True or False? Removing the label from a Pod that is used by ReplicaSet to match Pods, will cause the ReplicaSet to create a new Pod

True. When the label, used by a ReplicaSet in the selector field, removed from a Pod, that Pod no longer controlled by the ReplicaSet and the ReplicaSet will create a new Pod to compensate for the one it "lost".

How to scale a deployment to 8 replicas?

kubectl scale deploy <DEPLOYMENT_NAME> --replicas=8

ReplicaSets are running the moment the user executed the command to create them (like kubectl create -f rs.yaml)

False. It can take some time, depends on what exactly you are running. To see if they are up and running, run kubectl get rs and watch the 'READY' column.

How to expose a ReplicaSet as a new service?

kubectl expose rs <ReplicaSet Name> --name=<Service Name> --target-port=<Port to expose> --type=NodePort

Few notes:

• the target port depends on which port the app is using in the container
• type can be different and doesn't has to be specifically "NodePort"

Kubernetes - Storage

What is a volume in regards to Kubernetes?

A directory accessible by the containers inside a certain Pod. The mechanism responsible for creating the directory and managing it, ... is mainly depends on the volume type.

Which problems volumes in Kubernetes solve?

1. Sharing files between containers running in the same Pod
2. Storage in containers is ephemeral - it usually doesn't last for long. For example, when a container crashes, you lose all on-disk data.

Explain ephemeral volume types vs. persistent volumes in regards to Pods

Ephemeral volume types have the lifetime of a pod as opposed to persistent volumes which exist beyond the lifetime of a Pod.

Kubernetes - Network Policies

Explain Network Policies

kubernetes.io: "NetworkPolicies are an application-centric construct which allow you to specify how a pod is allowed to communicate with various network "entities"..."

In simpler words, Network Policies specify how pods are allowed/disallowed to communicate with each other and/or other network endpoints.

What are some use cases for using Network Policies?

• Security: You want to prevent from everyone to communicate with a certain pod for security reasons
• Controling network traffic: You would like to deny network flow between two specific nodes

True or False? If no network policies are applied to a pod, then no connections to or from it are allowed

False. By default pods are non-isolated.

In case of two pods, if there is an egress policy on the source denining traffic and ingress policy on the destination that allows traffic then, traffic will be allowed or denied?

Denied. Both source and destination policies has to allow traffic for it to be allowed.

Kubernetes - Configuration File

Which parts a configuration file has?

It has three main parts:

1. Metadata
2. Specification
3. Status (this automatically generated and added by Kubernetes)

What is the format of a configuration file?

YAML

How to get latest configuration of a deployment?

kubectl get deployment [deployment_name] -o yaml

Where Kubernetes cluster stores the cluster state?

etcd

Kubernetes - etcd

What is etcd?

True or False? Etcd holds the current status of any kubernetes component

True

True or False? The API server is the only component which communicates directly with etcd

True

True or False? application data is not stored in etcd

True

Why etcd? Why not some SQL or NoSQL database?

Kubernetes - Namespaces

What are namespaces?

Namespaces allow you split your cluster into virtual clusters where you can group your applications in a way that makes sense and is completely separated from the other groups (so you can for example create an app with the same name in two different namespaces)

Why to use namespaces? What is the problem with using one default namespace?

When using the default namespace alone, it becomes hard over time to get an overview of all the applications you manage in your cluster. Namespaces make it easier to organize the applications into groups that makes sense, like a namespace of all the monitoring applications and a namespace for all the security applications, etc.

Namespaces can also be useful for managing Blue/Green environments where each namespace can include a different version of an app and also share resources that are in other namespaces (namespaces like logging, monitoring, etc.).

Another use case for namespaces is one cluster, multiple teams. When multiple teams use the same cluster, they might end up stepping on each others toes. For example if they end up creating an app with the same name it means one of the teams overriden the app of the other team because there can't be too apps in Kubernetes with the same name (in the same namespace).

True or False? When a namespace is deleted all resources in that namespace are not deleted but moved to another default namespace

False. When a namespace is deleted, the resources in that namespace are deleted as well.

What special namespaces are there by default when creating a Kubernetes cluster?

• default
• kube-system
• kube-public
• kube-node-lease

What can you find in kube-system namespace?

• Master and Kubectl processes
• System processes

How to list all namespaces?

kubectl get namespaces

What kube-public contains?

• A configmap, which contains cluster information
• Publicely accessible data

How to get the name of the current namespace?

kubectl config view | grep namespace

What kube-node-lease contains?

It holds information on hearbeats of nodes. Each node gets an object which holds information about its availability.

How to create a namespace?

One way is by running kubectl create namespace [NAMESPACE_NAME]

Another way is by using namespace configuration file:

apiVersion: v1
kind: ConfigMap
metadata:
  name: some-cofngimap
  namespace: some-namespace

What default namespace contains?

Any resource you create while using Kubernetes.

True or False? With namespaces you can limit the resources consumed by the users/teams

True. With namespaces you can limit CPU, RAM and storage usage.

How to switch to another namespace? In other words how to change active namespace?

kubectl config set-context --current --namespace=some-namespace and validate with kubectl config view --minify | grep namespace:

OR

kubens some-namespace

What is Resource Quota?

How to create a Resource Quota?

kubectl create quota some-quota --hard-cpu=2,pods=2

Which resources are accessible from different namespaces?

Service.

Let's say you have three namespaces: x, y and z. In x namespace you have a ConfigMap referencing service in z namespace. Can you reference the ConfigMap in x namespace from y namespace?

No, you would have to create separate namespace in y namespace.

Which service and in which namespace the following file is referencing?

apiVersion: v1
kind: ConfigMap
metadata:
  name: some-configmap
data:
  some_url: samurai.jack

It's referencing the service "samurai" in the namespace called "jack".

Which components can't be created within a namespace?

Volume and Node.

How to list all the components that bound to a namespace?

kubectl api-resources --namespaced=true

How to create components in a namespace?

One way is by specifying --namespace like this: kubectl apply -f my_component.yaml --namespace=some-namespace Another way is by specifying it in the YAML itself:

apiVersion: v1
kind: ConfigMap
metadata:
  name: some-configmap
  namespace: some-namespace

and you can verify with: kubectl get configmap -n some-namespace

How to execute the command "ls" in an existing pod?

kubectl exec some-pod -it -- ls

How to create a service that exposes a deployment?

kubectl expose deploy some-deployment --port=80 --target-port=8080

How to create a pod and a service with one command?

kubectl run nginx --image=nginx --restart=Never --port 80 --expose

Describe in detail what the following command does kubectl create deployment kubernetes-httpd --image=httpd

Why to create kind deployment, if pods can be launched with replicaset?

How to get list of resources which are not in a namespace?

kubectl api-resources --namespaced=false

How to delete all pods whose status is not "Running"?

kubectl delete pods --field-selector=status.phase!='Running'

What kubectl logs [pod-name] command does?

What kubectl describe pod [pod name] does? command does?

How to display the resources usages of pods?

kubectl top pod

What kubectl get componentstatus does?

Outputs the status of each of the control plane components.

What is Minikube?

Minikube is a lightweight Kubernetes implementation. It create a local virtual machine and deploys a simple (single node) cluster.

How do you monitor your Kubernetes?

You suspect one of the pods is having issues, what do you do?

Start by inspecting the pods status. we can use the command kubectl get pods (--all-namespaces for pods in system namespace)

If we see "Error" status, we can keep debugging by running the command kubectl describe pod [name]. In case we still don't see anything useful we can try stern for log tailing.

In case we find out there was a temporary issue with the pod or the system, we can try restarting the pod with the following kubectl scale deployment [name] --replicas=0

Setting the replicas to 0 will shut down the process. Now start it with kubectl scale deployment [name] --replicas=1

What the Kubernetes Scheduler does?

What happens to running pods if if you stop Kubelet on the worker nodes?

What happens what pods are using too much memory? (more than its limit)

They become candidates to for termination.

Describe how roll-back works

True or False? Memory is a compressible resource, meaning that when a container reach the memory limit, it will keep running

False. CPU is a compressible resource while memory is a non compressible resource - once a container reached the memory limit, it will be terminated.

What is the control loop? How it works?

Explained here

Kubernetes - Operators

What is an Operator?

Explained here

"Operators are software extensions to Kubernetes that make use of custom resources to manage applications and their components. Operators follow Kubernetes principles, notably the control loop."

Why do we need Operators?

The process of managing stateful applications in Kubernetes isn't as straightforward as managing stateless applications where reaching the desired status and upgrades are both handled the same way for every replica. In stateful applications, upgrading each replica might require different handling due to the stateful nature of the app, each replica might be in a different status. As a result, we often need a human operator to manage stateful applications. Kubernetes Operator is suppose to assist with this.

This also help with automating a standard process on multiple Kubernetes clusters

What components the Operator consists of?

1. CRD (custom resource definition)
2. Controller - Custom control loop which runs against the CRD

How Operator works?

It uses the control loop used by Kubernetes in general. It watches for changes in the application state. The difference is that is uses a custom control loop. In additions.

In addition, it also makes use of CRD's (Custom Resources Definitions) so basically it extends Kubernetes API.

True or False? Kubernetes Operator used for stateful applications

True

What is the Operator Framework?

open source toolkit used to manage k8s native applications, called operators, in an automated and efficient way.

What components the Operator Framework consists of?

1. Operator SDK - allows developers to build operators
2. Operator Lifecycle Manager - helps to install, update and generally manage the lifecycle of all operators
3. Operator Metering - Enables usage reporting for operators that provide specialized services

Describe in detail what is the Operator Lifecycle Manager

It's part of the Operator Framework, used for managing the lifecycle of operators. It basically extends Kubernetes so a user can use a declarative way to manage operators (installation, upgrade, ...).

What openshift-operator-lifecycle-manager namespace includes?

It includes:

• catalog-operator - Resolving and installing ClusterServiceVersions the resource they specify.
• olm-operator - Deploys applications defined by ClusterServiceVersion resource

What is kubconfig? What do you use it for?

Can you use a Deployment for stateful applications?

Explain StatefulSet

Kubernetes - Secrets

Explain Kubernetes Secrets

Secrets let you store and manage sensitive information (passwords, ssh keys, etc.)

How to create a Secret from a key and value?

kubectl create secret generic some-secret --from-literal=password='donttellmypassword'

How to create a Secret from a file?

kubectl create secret generic some-secret --from-file=/some/file.txt

What type: Opaque in a secret file means? What other types are there?

Opaque is the default type used for key-value pairs.

True or False? storing data in a Secret component makes it automatically secured

False. Some known security mechanisms like "encryption" aren't enabled by default.

What is the problem with the following Secret file:

apiVersion: v1   
kind: Secret
metadata:
    name: some-secret
type: Opaque
data:
    password: mySecretPassword

Password isn't encrypted. You should run something like this: `echo -n 'mySecretPassword' | base64` and paste the result to the file instead of using plain-text.

How to create a Secret from a configuration file?

kubectl apply -f some-secret.yaml

What the following in Deployment configuration file means?

spec:
  containers:
    - name: USER_PASSWORD
      valueFrom:
        secretKeyRef:
          name: some-secret
          key: password

USER_PASSWORD environment variable will store the value from password key in the secret called "some-secret" In other words, you reference a value from a Kubernetes Secret.

Kubernetes - Volumes

True or False? Kubernetes provides data persistence out of the box, so when you restart a pod, data is saved

False

Explain "Persistent Volumes". Why do we need it?

Persistent Volumes allow us to save data so basically they provide storage that doesn't depend on the pod lifecycle.

True or False? Persistent Volume must be available to all nodes because the pod can restart on any of them

True

What types of persistent volumes are there?

• NFS
• iSCSI
• CephFS
• ...

What is PersistentVolumeClaim?

Explain Volume Snapshots

True or False? Kubernetes manages data persistence

False

Explain Storage Classes

Explain "Dynamic Provisioning" and "Static Provisioning"

Explain Access Modes

What is CSI Volume Cloning?

Explain "Ephemeral Volumes"

What types of ephemeral volumes Kubernetes supports?

What is Reclaim Policy?

What reclaim policies are there?

• Retain
• Recycle
• Delete

Kubernetes - Access Control

What is RBAC?

Explain the Role and RoleBinding" objects

What is the difference between Role and ClusterRole objects?

Explain what are "Service Accounts" and in which scenario would use create/use one

Kubernetes.io: "A service account provides an identity for processes that run in a Pod."

An example of when to use one: You define a pipeline that needs to build and push an image. In order to have sufficient permissions to build an push an image, that pipeline would require a service account with sufficient permissions.

What happens you create a pod and you DON'T specify a service account?

The pod is automatically assigned with the default service account (in the namespace where the pod is running).

Explain how Service Accounts are different from User Accounts

• User accounts are global while Service accounts unique per namespace
• User accounts are meant for humans or client processes while Service accounts are for processes which run in pods

How to list Service Accounts?

kubectl get serviceaccounts

Explain "Security Context"

kubernetes.io: "A security context defines privilege and access control settings for a Pod or Container."

Kubernetes - Patterns

Explain the sidecar container pattern

Kubernetes - CronJob

Explain what is CronJob and what is it used for

What possible issue can arise from using the following spec and how to fix it?

apiVersion: batch/v1beta1
kind: CronJob
metadata:
  name: some-cron-job
spec:
  schedule: '*/1 * * * *'
  startingDeadlineSeconds: 10
  concurrencyPolicy: Allow

If the cron job fails, the next job will not replace the previous one due to the "concurrencyPolicy" value which is "Allow". It will keep spawning new jobs and so eventually the system will be filled with failed cron jobs. To avoid such problem, the "concurrencyPolicy" value should be either "Replace" or "Forbid".

What issue might arise from using the following CronJob and how to fix it?

apiVersion: batch/v1beta1
kind: CronJob
metadata:
  name: "some-cron-job"
spec:
  schedule: '*/1 * * * *'
jobTemplate:
  spec:
    template:
      spec:
      restartPolicy: Never
      concurrencyPolicy: Forbid
      successfulJobsHistoryLimit: 1
      failedJobsHistoryLimit: 1

The following lines placed under the template:

concurrencyPolicy: Forbid
successfulJobsHistoryLimit: 1
failedJobsHistoryLimit: 1

As a result this configuration isn't part of the cron job spec hence the cron job has no limits which can cause issues like OOM and potentially lead to API server being down.
To fix it, these lines should placed in the spec of the cron job, above or under the "schedule" directive in the above example.

Kubernetes - Misc

Explain Imperative Management vs. Declarative Management

Explain what Kubernetes Service Discovery means

You have one Kubernetes cluster and multiple teams that would like to use it. You would like to limit the resources each team consumes in the cluster. Which Kubernetes concept would you use for that?

Namespaces will allow to limit resources and also make sure there are no collisions between teams when working in the cluster (like creating an app with the same name).

What Kube Proxy does?

What "Resources Quotas" are used for and how?

Explain ConfigMap

Separate configuration from pods. It's good for cases where you might need to change configuration at some point but you don't want to restart the application or rebuild the image so you create a ConfigMap and connect it to a pod but externally to the pod.

Overall it's good for:

• Sharing the same configuration between different pods
• Storing external to the pod configuration

How to use ConfigMaps?

1. Create it (from key&value, a file or an env file)
2. Attach it. Mount a configmap as a volume

True or False? Sensitive data, like credentials, should be stored in a ConfigMap

False. Use secret.

Explain "Horizontal Pod Autoscaler"

Scale the number of pods automatically on observed CPU utilization.

When you delete a pod, is it deleted instantly? (a moment after running the command)

What does being cloud-native mean?

Explain the pet and cattle approach of infrastructure with respect to kubernetes

Describe how you one proceeds to run a containerised web app in K8s, which should be reachable from a public URL.

How would you troubleshoot your cluster if some applications are not reachable any more?

Describe what CustomResourceDefinitions there are in the Kubernetes world? What they can be used for?

How does scheduling work in kubernetes?

The control plane component kube-scheduler asks the following questions,

1. What to schedule? It tries to understand the pod-definition specifications
2. Which node to schedule? It tries to determine the best node with available resources to spin a pod
3. Binds the Pod to a given node

View more here

How are labels and selectors used?

What QoS classes are there?

• Guaranteed
• Burstable
• BestEffort

Explain Labels. What are they and why would one use them?

Explain Selectors

What is Kubeconfig?

Kubernetes - Gatekeeper

What is Gatekeeper?

Gatekeeper docs: "Gatekeeper is a validating (mutating TBA) webhook that enforces CRD-based policies executed by Open Policy Agent"

Explain how Gatekeeper works

On every request sent to the Kubernetes cluster, Gatekeeper sends the policies and the resources to OPA (Open Policy Agent) to check if it violates any policy. If it does, Gatekeeper will return the policy error message back. If it isn't violates any policy, the request will reach the cluster.

Kubernetes - Policy Testing

What is Conftest?

Conftest allows you to write tests against structured files. You can think of it as tests library for Kubernetes resources.
It is mostly used in testing environments such as CI pipelines or local hooks.

What is Datree? How is it different from Conftest?

Same as Conftest, it is used for policy testing and enforcement. The difference is that it comes with built-in policies.

Kubernetes - Helm

What is Helm?

Package manager for Kubernetes. Basically the ability to package YAML files and distribute them to other users and apply them in different clusters.

Why do we need Helm? What would be the use case for using it?

Sometimes when you would like to deploy a certain application to your cluster, you need to create multiple YAML files/components like: Secret, Service, ConfigMap, etc. This can be tedious task. So it would make sense to ease the process by introducing something that will allow us to share these bundle of YAMLs every time we would like to add an application to our cluster. This something is called Helm.

A common scenario is having multiple Kubernetes clusters (prod, dev, staging). Instead of individually applying different YAMLs in each cluster, it makes more sense to create one Chart and install it in every cluster.

Explain "Helm Charts"

Helm Charts is a bundle of YAML files. A bundle that you can consume from repositories or create your own and publish it to the repositories.

It is said that Helm is also Templating Engine. What does it mean?

It is useful for scenarios where you have multiple applications and all are similar, so there are minor differences in their configuration files and most values are the same. With Helm you can define a common blueprint for all of them and the values that are not fixed and change can be placeholders. This is called a template file and it looks similar to the following

apiVersion: v1
kind: Pod
metadata:
  name: {[ .Values.name ]}
spec:
  containers:
  - name: {{ .Values.container.name }}
  image: {{ .Values.container.image }}
  port: {{ .Values.container.port }}

The values themselves will in separate file:

name: some-app
container:
  name: some-app-container
  image: some-app-image
  port: 1991

What are some use cases for using Helm template file?

• Deploy the same application across multiple different environments
• CI/CD

Explain the Helm Chart Directory Structure

someChart/ -> the name of the chart Chart.yaml -> meta information on the chart values.yaml -> values for template files charts/ -> chart dependencies templates/ -> templates files :)

How do you search for charts?

helm search hub [some_keyword]

Is it possible to override values in values.yaml file when installing a chart?

Yes. You can pass another values file: `helm install --values=override-values.yaml [CHART_NAME]`

Or directly on the command line: helm install --set some_key=some_value

How Helm supports release management?

Helm allows you to upgrade, remove and rollback to previous versions of charts. In version 2 of Helm it was with what is known as "Tiller". In version 3, it was removed due to security concerns.

Kubernetes - Security

What security best practices do you follow in regards to the Kubernetes cluster?

• Secure inter-service communication (one way is to use Istio to provide mutual TLS)
• Isolate different resources into separate namespaces based on some logical groups
• Use supported container runtime (if you use Docker then drop it because it's deprecated. You might want to CRI-O as an engine and podman for CLI)
• Test properly changes to the cluster (e.g. consider using Datree to prevent kubernetes misconfigurations)
• Limit who can do what (by using for example OPA gatekeeper) in the cluster
• Use NetworkPolicy to apply network security
• Consider using tools (e.g. Falco) for monitoring threats

Kubernetes - Troubleshooting Scenarios

Running kubectl get pods you see Pods in "Pending" status. What would you do?

One possible path is to run kubectl describe pod <pod name> to get more details.
You might see one of the following:

• Cluster is full. In this case, extend the cluster.
• ResourcesQuota limits are met. In this case you might want to modify them
• Check if PersistentVolumeClaim mount is pending

If none of the above helped, run the command (get pods) with -o wide to see if the node is assigned to a node. If not, there might be an issue with scheduler.

Users unable to reach an application running on a Pod on Kubernetes. What might be the issue and how to check?

One possible path is to start with checking the Pod status.

1. Is the Pod pending? if yes, check for the reason with kubectl describe pod <pod name> TODO: finish this...

Kubernetes - Submariner

Explain what is Submariner and what is it used for

"Submariner enables direct networking between pods and services in different Kubernetes clusters, either on premise or in the cloud."

You can learn more here

What each of the following components does?:

• Lighthouse
• Broker
• Gateway Engine
• Route Agent

Kubernetes - Istio

What is Istio? What is it used for?